High Quality ARM MCU STM32F373C8T6 STM32F373C8 STM32F LQFP-48 microcontroller Bom Service

Introduction to STM32F373C8T6

The STM32F373C8T6 is a powerful microcontroller manufactured by STMicroelectronics. It belongs to the STM32F3 series and is based on a 32-bit ARM Cortex-M4 core. With a wide range of features and peripherals, this microcontroller is well-suited for various applications, including motor control, industrial automation, and consumer electronics.

Features

The STM32F373C8T6 microcontroller offers an array of features, including:

• 32-bit ARM Cortex-M4 core running at up to 72 MHz
• 64 KB Flash memory and 16 KB SRAM
• Multiple communication interfaces, such as UART, SPI, and I2C
• Advanced analog peripherals, including ADCs and DACs
• Motor control capabilities, including an integrated motor control PWM timer

Peripherals

The STM32F373C8T6 microcontroller provides a range of peripherals, enhancing its functionality and versatility:

• UART: The microcontroller features several Universal Asynchronous Receiver-Transmitter (UART) interfaces, allowing serial communication with other devices. These interfaces support various baud rates and provide essential serial communication capabilities.
• SPI: The microcontroller includes Serial Peripheral Interface (SPI) ports, facilitating high-speed synchronous communication with external devices. This interface is commonly used for communication with sensors, displays, and memory devices.
• I2C: The microcontroller offers Inter-Integrated Circuit (I2C) interfaces, enabling communication with peripheral devices using a two-wire serial bus. This interface supports both master and slave modes and is commonly used for sensor and peripheral communication.
• ADCs and DACs: The microcontroller integrates Analog-to-Digital Converters (ADCs) for precise conversion of analog signals into digital values. It also provides Digital-to-Analog Converters (DACs) for accurate conversion of digital data back into analog signals. These peripherals are crucial for applications requiring analog signal processing and control.
• Motor control: The STM32F373C8T6 microcontroller offers an integrated motor control PWM timer, making it highly suitable for motor control applications. This feature simplifies the implementation of motor control algorithms and enhances the overall efficiency of motor control systems.

Development Tools

Developers can leverage several development tools provided by STMicroelectronics for the STM32F373C8T6 microcontroller:

• STM32CubeMX: A graphical tool that simplifies microcontroller configuration and generates initialization code based on the selected configuration. It streamlines the development process and accelerates project setup.
• STM32CubeIDE: An integrated development environment (IDE) designed specifically for STM32 microcontrollers. It offers a comprehensive development platform with features like code editing, compilation, and debugging.
• STM32 Nucleo-64 board: A development board that incorporates the STM32F373C8T6 microcontroller, providing easy access to all its pins. This board enables rapid prototyping and evaluation of designs.

Specifications

The following table provides an overview of the key specifications for the STM32F373C8T6 microcontroller:

Conclusion

The STM32F373C8T6 microcontroller is a powerful device with a wide range of features and peripherals, making it suitable for diverse applications. Its 32-bit ARM Cortex-M4 core, combined with its advanced analog peripherals and motor control capabilities, provides developers with a versatile platform for building various systems. Supported by development tools like STM32CubeMX and STM32CubeIDE, as well as the STM32 Nucleo-64 board, developers can efficiently harness the full potential of the STM32F373C8T6 microcontroller for their projects.

High Quality ARM MCU STM32F373C8T6 STM32F373C8 STM32F LQFP-48 microcontroller Bom Service Images